Repository navigation
XCLIP Command
Hakan Seven edited this page Nov 8, 2026
·
1 revision
Clips block references and external references to a boundary, or changes or removes an existing clip.
| Command | XCLIP |
| Aliases | XC |
| Web app | Available |
| Since | 0.1.4 |
- At
Select objects:, select block references and press Enter. Other objects are left out. If you select block references before you start, this step is skipped. - At
Enter clipping option [ON/OFF/Clipdepth/Delete/generate Polyline/New boundary] <New>:, press Enter for a new boundary or type an option. - For a new boundary on a reference that is already clipped, answer
Delete old boundary(s)? [Yes/No] <Yes>:. No ends the command. - The command line shows the mode (
Outside mode - Objects outside boundary will be hidden.). At[Select polyline/Polygonal/Rectangular/Invert clip] <Rectangular>:, choose how to give the boundary. - Pick two corners for a rectangle, pick points and press Enter for a polygon, or select a closed polyline.
| Option | What it does |
|---|---|
New boundary (N) |
Draws a new clip boundary. |
| ON / OFF | Turns an existing clip on or off without removing it. |
Clipdepth (C) |
Sets front and back clipping planes. At Specify front clip point or [Distance/Remove]: and then the back prompt, pick a point (its height above the boundary is used), type Distance (D) to enter a distance from the boundary, or Remove (R) to clear that plane. |
Delete (D) |
Removes the clip boundary. |
generate Polyline (P) |
Draws a polyline along the existing clip boundary. |
Rectangular (R) |
Boundary from two corners. |
Polygonal (P) |
Boundary from three or more points; Undo (U) removes the last point. |
Select polyline (S) |
Uses a closed polyline with at least three vertices. |
Invert clip (I) |
Switches between hiding what is outside the boundary and hiding what is inside it. |
-
ON, OFF, Clipdepth, Delete and generate Polyline need a reference that already has a clip; otherwise you see
No clip boundary found. - A front plane that lies behind the back plane is not applied.
- The ribbon's Clip tool runs
CLIP, which hands a selected block reference toXCLIP. -
XCLIPFRAMEcontrols whether clip boundaries are shown.
CLIP · XATTACH · XREF · VPCLIP
Open CAD Studio is free software under the GPL-3.0 licence · Source code · Download · Web app · Discussions
Get started
- Installation
- Your First Drawing
- Tutorials
- The User Interface
- Ribbon Reference
- Workspaces and Toolbars
- Navigating the Drawing
Draw and edit
- Drawing Setup and Units
- Precision Drawing
- Isometric Drafting
- Drawing Objects
- Multilines
- Selecting Objects
- Modifying Objects
- Hatches and Fills
- Layers and Properties
Annotate
Organise and reuse
Present and share
3D
Tools
Reference