Skip to content

ORTHOMODE System Variable

Hakan Seven edited this page Nov 8, 2026 · 1 revision

ORTHOMODE (System Variable)

Controls whether the cursor is limited to horizontal and vertical directions.

Type On/Off (0/1)
Saved in Drawing
Default 0 (Off)
Since 0.6.9

Values

Value Meaning
0 Ortho mode is off.
1 Ortho mode is on: points you pick are kept horizontal or vertical from the last point.

Notes

  • ORTHO, the F8 key and the status bar button switch it.
  • Turning Ortho on turns polar tracking off.
  • The value is saved with the drawing and restored when the drawing is opened.

Related

ORTHO · OSMODE · SNAPANG


System Variables · Command Reference

Clone this wiki locally