Skip to content

3DALIGN Command

Hakan Seven edited this page Nov 8, 2026 · 1 revision

3DALIGN (Command)

Moves and turns one selected 3D solid so that three source points land on three destination points, typed as 18 numbers.

Command 3DALIGN
Web app Available
Since 0.7.0

Usage

  1. Select exactly one 3D solid.
  2. Type 3DALIGN followed by 18 numbers: the X, Y and Z of the three source points, then the X, Y and Z of the three destination points. Example: 3DALIGN 0 0 0 10 0 0 0 10 0 5 5 0 5 15 0 -5 5 0
  3. The solid is replaced by the aligned solid, which stays selected.

Notes

  • Typing 3DALIGN on its own does not prompt for points. It only prints the usage line.
  • The first source point goes to the first destination point. The second point sets the direction, and the third point sets the plane. The solid is moved and turned only; it is never scaled.
  • Each set of three points must be distinct and must not lie on one line, or the command reports an error.
  • Objects on locked layers are ignored. If the selection is not exactly one solid, the command stops with a message.
  • To align any kind of object by picking points, use ALIGN.
  • The change can be undone in one step.

Related

ALIGN · 3DMOVE · 3DROTATE · 3DMIRROR


Command Reference · System Variables

Clone this wiki locally