Repository navigation
HATCH Command
Hakan Seven edited this page Nov 8, 2026
·
1 revision
Fills enclosed areas or selected closed objects with a hatch pattern, a solid fill or a gradient.
| Command | HATCH |
| Aliases |
BH · H
|
| Ribbon | Draw tab › Draw panel |
| Web app | Available |
| Since | 0.1.0 |
- Pick internal point or [Select objects/Draw/Undo/seTtings]: click inside each area you want to fill. The boundary is found from the objects around the point.
- Pick more areas, or type an option.
- Press Enter to accept and create the hatch.
The Hatch settings panel opens at the top left of the drawing area while the command runs. Use it to choose the pattern, angle, scale, colors and the other settings below.
| Option | What it does |
|---|---|
Select objects (S) |
Pick closed objects to fill instead of clicking inside areas. |
picK internal point (K) |
Go back to clicking inside areas. |
Draw (D) |
Draw the boundary yourself, point by point (see below). |
Undo (U) |
Removes the last area you added. |
seTtings (T) |
Shows the Hatch settings panel. |
| Accept (Enter) | Creates the hatch from the areas picked so far. |
After Draw, the prompt is "Specify start point or [picK internal point/Select objects/Rectangle/Circle/Mode/seTtings]".
| Option | What it does |
|---|---|
Rectangle (R) |
Draws a rectangular boundary, with the usual rectangle prompts. |
Circle (C) |
Draws a circular boundary, with the usual circle prompts. |
Mode (M) |
Choose Area (fill a closed outline) or Path (fill a band along a drawn path). |
ALignment (AL) |
Path mode only: places the band at the Center, Inside or Outside of the path. |
Width (W) |
Path mode only: sets the band width. |
Arc (A) |
Switches to arc segments. In arc mode, Line (L) switches back to straight segments. |
Length (L) |
Straight segments only: adds a segment of a typed length. |
Close (C) |
Closes the outline once it has at least three points. |
Undo (U) |
Removes the last point. |
| Exit (Enter) | Finishes the drawn boundary. |
- Type: pattern, solid, gradient or user defined, with Pattern, Angle, Scale, Spacing and Double where they apply.
- Color, Background, Color 1 and Color 2 for gradients, Layer and Transparency.
- Origin X and Origin Y for the pattern origin.
- Boundaries: pick internal points, select objects or draw a boundary; Keep boundaries.
- Islands: Normal, Outer or Ignore.
- Associative, Annotative, Create separate hatches, Gap tolerance and Draw order.
- If objects are selected when you start, the command starts in Select objects mode. If one of them is a hatch, the new hatch takes its settings.
- The command remembers the boundary method and draw mode you used last.
- Only objects visible on screen are used to find boundaries.
-
HPDLGMODEcontrols whether the settings panel opens by itself.HPASSOCsets whether new hatches are associative,HPGAPTOLsets the largest gap a boundary may bridge, andHPNAMEholds the default pattern.
GRADIENT · HATCHEDIT · BOUNDARY · HATCHTOBACK · HPNAME
Open CAD Studio is free software under the GPL-3.0 licence · Source code · Download · Web app · Discussions
Get started
- Installation
- Your First Drawing
- Tutorials
- The User Interface
- Ribbon Reference
- Workspaces and Toolbars
- Navigating the Drawing
Draw and edit
- Drawing Setup and Units
- Precision Drawing
- Isometric Drafting
- Drawing Objects
- Multilines
- Selecting Objects
- Modifying Objects
- Hatches and Fills
- Layers and Properties
Annotate
Organise and reuse
Present and share
3D
Tools
Reference