Repository navigation
INSERT Command
Hakan Seven edited this page Nov 8, 2026
·
1 revision
Inserts a block into the drawing from the Blocks palette.
| Command |
INSERT · -INSERT
|
| Aliases | I |
| Ribbon | Insert tab › Block panel |
| Web app | Inserting a drawing file by typing its name at the -INSERT prompt is not available in the web app. |
| Since | 0.1.0 |
- Run
INSERT. The Blocks palette opens on its Current Drawing tab. - Click a block in the palette. The palette's options decide which values are asked.
- Specify the insertion point, or type an option.
- Answer the remaining prompts for scale and rotation, if any.
- If the block has attributes, enter a value for each one, or press Enter to keep the default.
-INSERT runs entirely on the command line and suits scripts.
-
Enter block name or [?] <last>:type a block name, or pick it from the list shown as you type. Type?to list the blocks. If no block has that name, the name is looked up as a DWG file and the drawing is brought in as a block. Specify insertion point or [Basepoint/Scale/X/Y/Z/Rotate/Explode/REpeat]:Enter X scale factor, specify opposite corner, or [Corner/XYZ] <1>:Enter Y scale factor <use X scale factor>:Specify rotation angle <0>:- Enter the attribute values, if the block has attributes.
| Option | What it does |
|---|---|
Basepoint (B) |
Picks a different base point on the block for this insertion. |
Scale (S) |
Sets one scale factor for X, Y and Z before you place the block. |
X / Y / Z (X, Y, Z) |
Sets the scale factor for one axis before you place the block. The others stay at 1. |
Rotate (R) |
Sets the rotation angle before you place the block. |
Explode (E) |
Inserts the block as separate objects. |
REpeat (RE) |
Keeps inserting the same block; you are asked whether each one gets its own scale and rotation. |
Corner (C) |
Sets the X and Y scale from an opposite corner point. |
| XYZ | Asks for separate X, Y and Z scale factors. |
- When a block has more than one possible insertion point, the prompt says so and Ctrl cycles through them.
- Scale factors must be nonzero.
BLOCKSPALETTE · BLOCK · WBLOCK · MINSERT · EXPLODE · BEDIT
Open CAD Studio is free software under the GPL-3.0 licence · Source code · Download · Web app · Discussions
Get started
- Installation
- Your First Drawing
- Tutorials
- The User Interface
- Ribbon Reference
- Workspaces and Toolbars
- Navigating the Drawing
Draw and edit
- Drawing Setup and Units
- Precision Drawing
- Isometric Drafting
- Drawing Objects
- Multilines
- Selecting Objects
- Modifying Objects
- Hatches and Fills
- Layers and Properties
Annotate
Organise and reuse
Present and share
3D
Tools
Reference