Repository navigation
CIRCLE Command
Hakan Seven edited this page Nov 8, 2026
·
1 revision
Draws a circle by center and radius or diameter, by two or three points, or tangent to two or three objects.
| Command | CIRCLE |
| Aliases | C |
| Ribbon | Draw tab › Draw panel |
| Web app | Available |
| Since | 0.1.0 |
- Run
CIRCLE. - At "Specify center point:", pick the center, or type an option.
- At "Specify radius or type value", pick a point on the circle or type the radius. Press Enter to use the radius shown in angle brackets.
| Option | What it does |
|---|---|
Diameter (D) |
At the radius prompt: asks for the diameter instead. |
2P (2P) |
Pick the two ends of a diameter. |
3P (3P) |
Pick three points on the circle. |
Ttr (TTR or T) |
Select two objects the circle must touch, then give the radius. |
Ttt (TTT) |
Select three objects the circle must touch. |
- The last radius you used becomes the default for the next circle.
- When a tangent construction has more than one answer, the circle that best fits the points where you picked the objects is used.
- The circle is drawn in the current working plane.
- The ribbon drop-down offers Center, Radius; Center, Diameter; 2-Point; 3-Point; Tan, Tan, Radius; and Tan, Tan, Tan.
Open CAD Studio is free software under the GPL-3.0 licence · Source code · Download · Web app · Discussions
Get started
- Installation
- Your First Drawing
- Tutorials
- The User Interface
- Ribbon Reference
- Workspaces and Toolbars
- Navigating the Drawing
Draw and edit
- Drawing Setup and Units
- Precision Drawing
- Isometric Drafting
- Drawing Objects
- Multilines
- Selecting Objects
- Modifying Objects
- Hatches and Fills
- Layers and Properties
Annotate
Organise and reuse
Present and share
3D
Tools
Reference