Skip to content

DIST Command

Hakan Seven edited this page Nov 8, 2026 · 1 revision

DIST (Command)

Measures the distance and angles between two points, and their X, Y and Z offsets.

Command DIST
Aliases DI
Ribbon Draw tab › Measure panel
Web app Available
Since 0.1.3

Usage

  1. Specify the first point.
  2. Specify the second point. While you move the cursor, a rubber band line and a live distance readout follow it.

The command line shows the result and the command ends:

  • Distance: the straight distance between the points.
  • Angle in XY Plane: the direction from the first point to the second in the XY plane.
  • Angle from XY Plane: how steeply the line rises out of the XY plane.
  • Delta X, Delta Y, Delta Z: the offsets from the first point to the second.

Notes

  • Values are measured in the current UCS.
  • Lengths use the drawing's length units and precision (LUNITS, LUPREC). Angles use AUPREC decimals and are counted from ANGBASE in the direction set by ANGDIR.
  • Use object snaps to measure between exact points on objects.

Related

MEASUREGEOM · AREA · ID · LIST


Command Reference · System Variables

Clone this wiki locally