Repository navigation
ARC Command
Hakan Seven edited this page Nov 8, 2026
·
1 revision
Draws an arc from three points, or from a start point, center, end point, angle, chord length, direction or radius.
| Command | ARC |
| Aliases | A |
| Ribbon | Draw tab › Draw panel (Arc drop-down) |
| Web app | Available |
| Since | 0.1.0 |
The default method draws an arc through three points:
- Specify start point of arc, or type Center (
C). - Specify second point of arc, or type Center (
C) or End (E). - Specify end point of arc.
Start, center method (after Center at the second prompt, or Center first and then the start point):
- Specify the start point and the center point.
- Specify end point of arc, or type Angle (
A) or chord Length (L). A plain number typed here is the length of the arc along the circle.
Start, end method (after End at the second prompt):
- Specify end point of arc.
- Specify center point of arc, or type Angle (
A), Direction (D) or Radius (R).
Press Enter at the first prompt to continue an arc tangent from the end of the last line or arc you drew.
| Option | What it does |
|---|---|
Center (C) |
Asks for the center point of the arc next. |
End (E) |
Asks for the end point after the start point, then the center or another value. |
Angle (A) |
Asks for the included angle. You can type it or pick a point. |
chord Length (L) |
Asks for the length of the chord between start and end. |
Direction (D) |
Asks for the tangent direction at the start point. |
Radius (R) |
Asks for the radius. You can type it or pick a point. |
- Arcs run counterclockwise. Hold Ctrl to flip the direction while you pick.
- In the three-point method you can pick a point with the Tangent object snap to make the arc tangent to that object.
- The Arc drop-down on the ribbon starts the other arc methods directly: 3-Point, Start Center End, Start Center Angle, Start Center Length, Start End Angle, Start End Direction, Start End Radius, Center Start End, Center Start Angle, Center Start Length, and Continue.
- The arc is drawn in the current working plane (UCS).
CIRCLE · PLINE · ELLIPSE · FILLET
Open CAD Studio is free software under the GPL-3.0 licence · Source code · Download · Web app · Discussions
Get started
- Installation
- Your First Drawing
- Tutorials
- The User Interface
- Ribbon Reference
- Workspaces and Toolbars
- Navigating the Drawing
Draw and edit
- Drawing Setup and Units
- Precision Drawing
- Isometric Drafting
- Drawing Objects
- Multilines
- Selecting Objects
- Modifying Objects
- Hatches and Fills
- Layers and Properties
Annotate
Organise and reuse
Present and share
3D
Tools
Reference