Skip to content

OFFSET Command

Hakan Seven edited this page Nov 8, 2026 · 1 revision

OFFSET (Command)

Creates a parallel copy of a line, arc, circle, ellipse, polyline, spline, ray or construction line at a set distance or through a point.

Command OFFSET
Aliases O
Ribbon Draw tab › Modify panel
Web app Available
Since 0.1.0

Usage

  1. The current settings are shown (Erase source, Layer and OFFSETGAPTYPE).
  2. Specify offset distance or [Through/Erase/Layer]. Type a distance, press Enter to keep the last one, or pick two points to measure it.
  3. Select object to offset or [Exit/Undo] .
  4. Specify point on side to offset. The copy is made on that side.
  5. Select the next object, or press Enter to finish.

Options

Option What it does
Through (T) Instead of a fixed distance, you specify a through point for each copy.
Erase (E) Erase source object after offsetting? [Yes/No].
Layer (L) Enter layer option for offset objects [Current/Source]. Current puts copies on the current layer, Source on the layer of the original.
Multiple (M) Keeps offsetting the new copy by the same distance, one click after another. Press Enter to go to the next object.
Undo (U) Removes the last copy.
Exit (E) Ends the command.

Notes

  • If objects are already selected when you start, the command goes straight to the side step with a preview that follows the cursor. Click a through point, or type a distance; a negative distance places the copy on the other side.
  • The Erase, Layer and Through choices are kept for the next OFFSET in the session.
  • OFFSETGAPTYPE sets how outward polyline offsets close corner gaps: 0 extends the segments, 1 fills with an arc, 2 with a chamfer line.

Related

COPY · JOIN · FILLET


Command Reference · System Variables

Clone this wiki locally