Skip to content

FRAMES2 System Variable

Hakan Seven edited this page Nov 8, 2026 · 1 revision

FRAMES2 (System Variable)

Shows the frames of images, underlays, wipeouts, clipped references and point cloud clips without plotting them.

Type Action (takes no value)
Saved in Drawing
Default None (it is an action)
Since 0.1.4

Values

FRAMES2 takes no value. Entering it sets FRAME to 2, so all frames are shown but not plotted.

Notes

  • It is the "Display but don't plot frames" item of the Frames list on the Insert tab of the ribbon.
  • The result is stored in the drawing through the frame variables.

Related

FRAME · FRAMES0 · FRAMES1 · FRAMES3


System Variables · Command Reference

Clone this wiki locally