Skip to content

EXTEND Command

Hakan Seven edited this page Nov 8, 2026 · 1 revision

EXTEND (Command)

Extends lines, arcs, open polylines and other open curves to meet boundary edges.

Command EXTEND
Aliases EX
Ribbon Draw tab › Modify panel
Web app Available
Since 0.1.0

Usage

  1. Type EXTEND.
  2. At Click near an end or draw a crossing box to extend multiple objects (Shift trims):, click an object near the end you want to extend. The end grows to the nearest boundary.
  3. Keep clicking objects, or drag a box to extend several at once.
  4. Press Enter to finish.

In Standard mode the command first asks you to Select boundary edges. Pick the edges (pick one again to remove it), press Enter, then click the objects to extend.

Options

Option What it does
Boundary edges (B) Choose the boundary edges yourself. Only those edges stop the extension.
Fence (F) Pick points of a fence line. Press Enter to extend every object the fence crosses.
Crossing (C) Pick two corners. Every object the box crosses is extended.
Edge (E) Standard mode only. Switches between extending to where a boundary would be if it were extended (Edge: Extend) and to the boundary as drawn (Edge: No extend).
mOde (O) Choose Quick or Standard. Quick uses every object as a boundary. Standard asks for boundary edges first.

Notes

  • Hold Shift while you click to trim the object instead of extending it.
  • If you select objects before starting EXTEND, they are used as the boundary edges.
  • The mode you pick is remembered for both EXTEND and TRIM (the TRIMEXTENDMODE setting).
  • You can extend lines, arcs, elliptical arcs, open lightweight polylines and splines. Lines, arcs, circles, ellipses, rays, construction lines, splines and polylines can act as boundaries.
  • Objects on locked layers cannot be changed.

Related

TRIM · EXTRIM · FILLET · LENGTHEN


Command Reference · System Variables

Clone this wiki locally