Skip to content

SCALE Command

Hakan Seven edited this page Nov 8, 2026 · 1 revision

SCALE (Command)

Enlarges or reduces selected objects about a base point by a scale factor or by reference lengths.

Command SCALE
Aliases SC
Ribbon Draw tab › Modify panel
Web app Available
Since 0.1.0

Usage

  1. Select the objects, or start the command and select them at the prompt.
  2. Specify the base point.
  3. Specify the scale factor: type a value, or move the cursor and click (the distance from the base point is the factor). Press Enter to use the factor shown in the prompt.

Options

Option What it does
Copy (C) Scales a copy and leaves the original objects in place.
Reference (R) Scales by new length divided by reference length. Pick two points or type the reference length, then pick or type the new length from the base point.

Notes

  • The objects are scaled equally in every direction.
  • The last factor you used is offered as the default the next time.

Related

ROTATE · MOVE · STRETCH · SCALETEXT


Command Reference · System Variables

Clone this wiki locally