Repository navigation
DIM Command
Hakan Seven edited this page Nov 8, 2026
·
1 revision
Creates many kinds of dimensions in one command; the kind follows the object or points you pick.
| Command | DIM |
| Ribbon | Annotate tab › Dimensions panel |
| Web app | Available |
| Since | 2026.36 |
- Pick an object, specify the first extension line origin, or type an option.
- A horizontal or vertical line or a polyline segment gives a linear dimension; a slanted line gives an aligned dimension.
- A circle gives a diameter dimension; an arc gives a radius dimension.
- A point starts a dimension between two points. If the second point is not straight across or above the first, the dimension is aligned.
- Place the dimension. The prompts and options of the matching dimension type apply.
- DIM asks again for the next dimension. Press Enter at the main prompt to finish.
At the main prompt:
| Option | What it does |
|---|---|
Angular (A) |
Starts an angular dimension, as in DIMANGULAR. |
Baseline (B) |
Creates a baseline series. Pick the first extension line origin of the base dimension, then the next origins. Offset (O) sets the spacing between the dimension lines. |
Continue (C) |
Creates a chain of dimensions. Pick the extension line origin to continue from, then the next origins. |
Ordinate (O) |
Starts an ordinate dimension, as in DIMORDINATE. |
aliGn (G) |
Aligns dimensions: select a base dimension, then the dimensions to line up with it. |
Distribute (D) |
Spaces selected dimensions evenly (Equal) or by a set distance (Offset). |
Layer (L) |
Sets the layer for the dimensions DIM creates. Type a layer name, pick an object to use its layer, type . for the current layer, or ? to list layers. eXit (X) or Enter goes back. |
Undo (U) |
Removes the last dimension and continues. |
After picking a circle or an arc, these extra options are offered while you place the dimension:
| Option | What it does |
|---|---|
Radius (R) |
Switches a circle to a radius dimension. |
Diameter (D) |
Switches an arc to a diameter dimension. |
Jogged (J) |
Starts a jogged radius dimension, as in DIMJOGGED. |
Angular (A) |
Switches to an angular dimension of the same object. |
Arc length (L) |
Switches an arc to an arc length dimension. |
text aNgle (N) |
Sets the angle of the dimension text. |
- When a new dimension overlaps existing ones, DIM asks what to do: Move away (
M), Break up (B), Replace (R) or None (N). In a continued series only Break up and None are offered. Your choice becomes the default for the session. - Each dimension uses the current dimension style.
DIMLINEAR · DIMALIGNED · DIMANGULAR · DIMRADIUS · DIMDIAMETER · DIMBASELINE · DIMCONTINUE · DIMSPACE · DIMSTYLE
Open CAD Studio is free software under the GPL-3.0 licence · Source code · Download · Web app · Discussions
Get started
- Installation
- Your First Drawing
- Tutorials
- The User Interface
- Ribbon Reference
- Workspaces and Toolbars
- Navigating the Drawing
Draw and edit
- Drawing Setup and Units
- Precision Drawing
- Isometric Drafting
- Drawing Objects
- Multilines
- Selecting Objects
- Modifying Objects
- Hatches and Fills
- Layers and Properties
Annotate
Organise and reuse
Present and share
3D
Tools
Reference